Category Archives: broadband

Teksavvy cable is *faster* than advertised

You may remember my experiment a few weeks back with the worlds most desperate way to increase broadband speed while sticking with an indie ISP. (Previously: In Which Tom attempts to bond two DSL lines into single home internet pipe of great power like Voltron).

Well the folks fighting the good fight at Teksavvy (thanks Rocky) have finally been able to offer speeds faster than 5MBit in Ontario thanks to introducing a cable option. (Bell, fighting tooth and nail against regulations requiring them to share their network, has for years ghetoized Teksavvy and others to 5down 1up DSL service even while offering much faster speeds to their own retail customers).

For me the upside was to get 10Mb down, 1Mb up (with a healthy 200GB cap) service with ONE pipe, and ditch one extra dsm modem, one extra phone line, a whole mess of cabling and save about $30 a month.

So far I can say it’s a big success. In fact the connection is not even 10MBit, it’s faster!

Craziest thing I’ve ever heard of, an ISP that actually delivers faster than advertised speeds. We’ve come a long way.

Anyway, I thought you all should know this. And Teksavvy is cheap, $42/month for the 10/1/200GB plan. It’s also un-throttled or filtered.

Highly recommended. If you are currently on Teksavvy DSL, or any other basic broadband service, I’d recommend switching.

The only fatal flaw is the anemic 1MBit upload speed. I really wish more ISPs (looking at you Rogers) would get that shit sorted out so applications like cloud-based based storage, media sharing and computing would be vastly more practical. Right now your only decent option is Bells tempting but tightly capped and bracingly expensive fiber with the missing “r” service.

In Which Tom attempts to bond two DSL lines into single home internet pipe of great power like Voltron

voltron diagram

It really only did take about nine minutes to actually set up. Two DSL lines, one internet connection. Not counting a few later hours of mild swearing and voodoo rituals to get it to work right on all the computers in the house. And not counting the few days it took for the Bell tech to setup the extra line, and the indefinite project to figure out how to tidy up all those boxes and wires. But it works! and it’s not that hard.

The goal was this, how to turn two regular off-brand 5MBit down/0.8MBit up DSL connections into one single 10/1.6MB super-pipe using a trick called multi-linkPPP (MLPPP).

There are a few side-effects of using MLPPP, the one being that Bell (who provides the last mile for all indie-ISPs) cannot, for some obscure technical reason, throttle, inspect, cap, “traffic shape” or otherwise abuse packets sent over MLPPP.

Monthly bandwidth caps are another tool the major ISP’s use to manage the dangerous risk of network congestion competition with their other digital services or lines of business. With dual Teksavvy connections I’ve discovered I now have silly-high (400GB) monthly bandwith cap. Not sure even what to do with that, but maybe I’ll think of something entertaining.

One last relevant side effect to mention is that with this setup your monthly bill gets doubled too. Combined with the requirement for two phone lines, two DSL lines and a customized router, you might think hey, that’s a pretty crazy way to try and keep up with Moore’s law. You’d right. By some accounts, Teksavvy is the only “major” ISP on the planet to offer MLPPP. It’s also a sad story to go through such trouble for a 10MB connection when Bell/Rogers are technically capable of easily providing a much faster connection through a single account. And lets ignore that 10MB is only 10% of the speed of the every day and generally dirt-cheap broadband you’d find places like Sweden, Japan or Korea.

The jury is very much out on whether, for practical purposes, a 10Mbit Voltron connection from Teksavvy is really better than a 16 or 20 MBit “ultra” offering from Bell or Rogers. It’s certainly no cheaper (each Teksavvy line is about $37/month). But pay no attention to creeping thoughts of rationality, the important thing is, it’s twice as fast as what you had before!

Besides, if you want the fastest pipe you can get from a friendly indie ISP, whether for practical or philosophical reasons, you just have to buy more than one. Crude and amazingly inefficient as that may be. But also kinda fun.

Because it’s hard to find elsewhere on the web, here are all the step-by-step instructions.

1. Call Teksavvy, tell them you want to order not one but two DSL lines and ask them to enable something called “MLPPP” on one of the lines. They will know what you are talking about. It doesn’t matter which line has MLPPP enabled, but it will charge you an extra $4/month on that line.

2. While waiting for your DSL to be set up, head to the store to pick worlds most hackable router, the venerable Linksys WRT54GL. You will have to flash the router’s bios. For those unfamiliar, this is a lot easier than it sounds, it is literally a one click procedure to effectively replace the routers operating system with this much better one that also supports MLPPP. If only upgrading the OS on regular computers were so easy. Or if this still terrifies you, you can buy a pre-configured WRT54GL straight from Teksavvy.

3. When the Bell tech comes to your house to provision your DSL, beg, bribe or if necessary pay ($100 is the official rate) the tech to replace one of your regular jacks with a two-line phone jack, if you don’t have such a thing already (and so you can plug in your two DSL routers conveniently side by side). Or if you are particularly handy, do the wiring yourself in advance.

4. Watch guspaz’s awesome youtube video on how to setup up bonded multilink (MLPP) DSL connection in 9 minutes or less:

5. If anything doesn’t work straight away, I can recommend gradual elevating levels of swearing and pejorative gesticulations. Of course while doing this, you might also quietly double-check that all the cables are actually plugged in, and securely plugged in, to where you think are plugged in. (a combination of these two approaches seemed to work for me)

Alternate setups:

Another ISP Acanac claims to be supporting MLPPP soon. If that qualified for their excellent $18/mo for 1 year plan, that would make dual connections pretty affordable.

Here is another asus router they say works if you want to try it.

FYI: Teksavvy, the best local deal in Broadband?

telephone operators

You may recall some of my historic adventures in finding cheap broadband [ Open letter to 3Web, local broadband internet service provider *]. Well I posed the question to the TorCamp Google Group and received exactly one resounding reply. So I thought I’d pass it on:

Teksavvy.com I have it at home and work now. I’ve tried Bell, Rogers, and a handfull of
other DSL providers… – Colin Smillie

I have had pretty awful results with Bell myself. Roger was alright.
But definitely, of the better local ISPs, TekSavvy in particular, has
been doing it right. It makes it much easier to be a geek… So, is your sanity worth a lot to you? Then start off with TekSavvy. -Li-fan

Agreed – Teksavvy is the way to go. I switched to them a good few
months ago haven’t regretted the decision one bit. Least of all
bittorrent and secure connections work without throttling! – mkuplens

Had been extra smart, I might have asked the question first to gig park, Noah & Pema’s excellent new social tool for service recommendations on pretty much anything </worthyplug>.

Anyway, I’ll post my thoughts on Teksavvy to this blog and gigpark after I give them a try for a while. Cheers all, and thanks to all for your recommendations.